Refrigeration1.Air Conditioners and fridges keep cool using the same priniciples as water cooler.–by employing a heat pump. A fluid called refrigerant is affected by a heat pump, moving heat outside of the water by going through a closed loop of pipe., thereby cooling off it. Heat pumps ordinarily are powered by a centrifugal pump called the compressor, which is a fast-spinning turbine that sucks refrigerant in and propels it into the condenser.The Condenser Stage2.The condenser is a length of metallic tube located bottom the cooler. The liquid within it is pressurized by the compressor. When a fluid is compressed, it heats up. In the example of the compressor, well-nigh of that heat escapes out through the metal tube as the fluid flows through, cooling down the refrigerant. The refrigerant is only just warmer than air temperature when it has achieved the expansion gate at the end.The Evaporator Stage3.Liquid slowly passes into the evaporator via a small valve called the expansion gate. The evaporator is held at a low force, unlike the condenser. This causes the refrigerant to expand as it goes through, which makes it cool down. The evaporator runs past the H2O inside the cooler. Heat is leached out to the cold condensor in the water, getting the H2O colder. The process starts over once the evaporator warms the h20 and it’s pumped through the compressor.
October 5, 2009
What Makes Water Cooler Cool
Comments Off